Inspect Your Kit

Plan Your Collection Timing

Create Your 3X4 Account

Register Your Kit Code

Collect Your DNA Sample

Return Your Sample

View Your Results

1. Inspect your 3X4 DNA Kit

Immediately upon receiving your 3X4 kit, conduct a quick visual inspection to ensure all components are intact and ready for use:

• Confirm the vial contains liquid and shows no signs of leakage
• Ensure the swab packet is sealed and unopened
• Check that both the vial and swab are within their expiration dates
• Verify that the small resealable bag closes securely

If anything appears damaged, missing, or expired, contact 3X4 Support before collecting your sample.

2. Plan when to collect your sample

For optimal sample quality, collect your swab first thing in the morning, before brushing your teeth, eating, drinking, smoking, or chewing gum. If you’ve had anything in your mouth, wait at least 30 minutes before collecting your sample to reduce the risk of contamination.

Important: Step-by-step swab instructions will be available in your 3X4 account once your kit has been registered.

3. Register your kit code

Your kit code must be registered before you return your sample to the lab. Samples received without a registered kit code may not be able to be processed and may be discarded.

Kit registration may be completed by your healthcare provider, depending on their process. Please follow any instructions they have given you.

If you are responsible for registering your kit yourself, complete the steps outlined below before collecting your sample.

Your providers 3X4 Practitioner code

Your 3X4 Blueprint test was ordered by your healthcare provider, Sharon Wisdom. To ensure your genetic results are securely linked to your provider within the 3X4 system, you’ll be asked to connect your kit during registration.

When registering your 3X4 kit, you may be prompted to enter your provider’s 3X4 Practitioner Code, which is included in your “Important: Your 3X4 DNA Kit Instructions” email.

How to register your 3X4 Kit code

Each 3X4 kit includes a unique Kit Code printed on the sample collection vial. This code is used to identify your sample throughout laboratory processing.

Please take care to ensure all registration information is entered correctly.

To register your kit:

1. Locate the insert card inside your 3X4 kit.

2. Scan the QR code to begin registration.

   • If you’re unable to scan the code, manually enter the web link into your browser.

3. Follow the on-screen instructions to securely link your kit code to your 3X4 account.

Registering multiple kits

If you are collecting samples for more than one person, take extra care to avoid mix-ups:

• Keep track of which person uses each DNA sample vial until every kit code has been registered

• Confirm you are linking the kit code to the correct individual / 3X4 profile

4. Collect your DNA sample

Once your kit has been registered, you’ll receive step-by-step instructions in your 3X4 account explaining how to collect your sample.

It’s important to follow these instructions carefully. Samples that are not collected according to the guidance may not meet laboratory quality standards and could require recollection.

5. Return your sample

Place your sealed sample inside the labeled return shipping bag and drop it off at your nearest participating shipping location.

You can find the nearest drop-off location here: Find your nearest shipping center

6. Access your results

Your results will be sent directly to your provider, who will review them before sharing them with you.

No additional action is needed — your provider will follow up with you once your results are ready.

If you have any questions, please contact your provider or reach out to the 3X4 Support team at support@3X4genetics.com.